Glue evaporation speed too fast or too slow --- adjust the rate of glue evaporation or change the construction process Temperature is too low, affecting the ini...
Adhesive sticky the reason Too low temperature Open time is not enough, bonding too early Solution The plastic tank on the 30 ℃ -50 ℃ hot water immersion 5-10...
Possible problems: The film is cracked or bubbling Poor contact surface Insufficient glue (lack of glue) When glued, the pressure is too high and the glue is sq...
Common reasons: Surface treatment is not clean Surface roughness Airing time is not enough or too long Use of overdue glue Excessive viscosity The old glue is n...
A. Each product has a. storage period, according to the international standard and national standard, in the index storage at room temperature (24 c) case. The ...
1. The pH value of the waterproof adhesive must be controlled within the prescribed limits; 2. It must be more heavily coated than normal paste; 3. The produ...
